RTK Explanation

How the RTK Bridge Adds Value in the Survey Market

Chat212 Nigeria - We Make your voice Counts : 10 rules for success from Africa’s richest man

Chat212 Nigeria - We Make your voice Counts : 10 rules for success from Africa’s richest man: Aliko Dangote is a Nigerian billionaire and Africa’s richest man.                                                      

Glossary of Terms - Theodolites Parts E

Glossary of terms

Gradient - An alternative to measuring vertical angles in degrees, the gradient is
defined as the tangent of the vertical angle with respect to the horizontal times 100%.
For example, a gradient of -50% means a slope of 22.50 below the horizontal.
Face left - The theodolite position in which the vertical circle is on the viewer's left
while he looks into the telescope.
Face right - The theodolite position in which the vertical circle is on the viewer's right
while he looks into the telescope.
Horizontal circle - The graduated circle in the horizontal plane that the theodolite
reads out to measure horizontal angles.
Horizontal clamp - Thumbscrew that can be used to fix the angle of the theodolite
with respect to the vertical axis. When the horizontal clamp is tight, the instrument
can be translated horizontally with the slow-motion screw.
Line of collimation - The line of sight through the centre of the telescope crosshairs.
Optical plummet - Small telescope whose eyepiece is near the bottom of the
theodolite that looks at the directly beneath the theodolite and is used for centering.
Round of angles - A complete set of angle measurements performed first in the faceleft,
then in the face-right position.
Slow-motion screw - The fine adjustment screw used to translate the theodolite in the
horizontal or vertical plane when the horizontal or vertical clamp is tightened.
Trunnion axis - The axis about which the telescope pivots.
Vertical axis - The axis about which the horizontal circle pivots.
Vertical circle - The graduated circle in the vertical plane that the theodolite reads out
to measure vertical angles.

LESSON NOTE ON COMPONENTS PARTS OF A THEODOLITE Parts D

COMPONENTS PARTS OF A THEODOLITE:

Leveling head: It supports the main working parts of the instrument and screw on the tripod.
 The head comprises of two parts:
 • Leveling base or tribrach fitted with leveling foot screws for leveling the instrument.
 • Movable head or centering arrangement for centering the vertical axis accurately over the station.

Lower circular horizontal metal plate:
 It carries a circular graduated arc. It is silvered and graduated from 00 to 3600 in a clock wise direction.
Upper circular horizontal metal plate: The upper plate carries an index and vernier to Read fine reading on the graduated horizontal circle.

Telescope: Fitted to a horizontal axis, it consists of eye piece and diaphragm at one end and objective glass at the other end.
The telescope has focusing screw by which any Object can be bisected. Circular graduated arc on a vertical circle: It is attached to the horizontal axis of the telescope. It is usually divided into 4 quadrants, but in some instruments it is graduated from 00 to 3600 the sub divisions of the vertical circle are similar to those of horizontal circle. Vernier frame: carrying an index and verniers to measure vertical angles.

Lower clamp and lower tangent screw: A lower clamp, clamps the lower plate and the lower tangent screw enables finely controlled circular motion of lower plate.

Upper clamp and upper tangent screw: An upper clamp, clamps the upper plate to lower one, and the upper tangent screw enables finely controlled circular motion about vertical axis.

 Vertical circle clamp and tangent screw: A vertical circle clamp, clamps the vertical circle and its tangent screw enables a finely controlled circular movement to be given to the combined telescope and vertical circle about the horizontal axis.

Circular level: It is located on the top of tribrach. Plate level: It consist of plate bubble, which keeps the instrument parallel to horizontal axis.

Compass: A circular or trough compass may be mounted on the vernier plate between the standards for observing bearings.

Tripod: Theodolite is mounted and fixed on the tripod for each set up. As tripod has adjustable legs, theodolite can roughly leveled with the adjusting the legs of tripod.

LESSON NOTE ON TEMPORARY ADJUSTMENT OF THEODOLITE Part C

TEMPORARY ADJUSTMENT OF THEODOLITE

Temporary adjustment are the adjustment which are required to be made at each setting of the instrument before taking observation. These adjustments are also known as station adjustments.

The following three adjustments are required:

1. Setting up and centring,

2.Levlling

3.Elimination of parallax.

Setting up and Centring

This involves setting the theodolite exactly over the station mark or on the station peg. It is done by the following steps:

• The plumb bob is suspended from a small hook attached to the vertical axis of the theodolite
•     The instrument is placed over the station mark with the telescope at a convenient height and with the tripod legs set well apart.
• Two legs of the tripod are set frimly into the ground and the third leg is moved radially to bring plumb bob exactly over the station mark. Then the third leg is also pushed into the ground.
• The instrument is roughly centered over the station mark and then by means of the shifting head, the plumb bob is brought excatly over the station mark.

 

Levelling

The procedure of levelling with three foot screws is as follows:-

•    Turn the upper plate  untill the longitudinal axis of the plate level is roughly parallel to a line joining any two of the levelling screws.
•     Hold these two levelling screws between the thumb and the first finger and turn them uniformly so that the thumbs move either towards each other or away from each other until the bubble is central.
• Turn the upper palte 90, i.e untill the axis of the level passes over the position of the third levelling screw C.
• Turn this levelling screw C untill the bubble is central.
• Return the upper plate through 90 to its original position. Rotate screws A and B inwards or outwards till the bubble is central.
• Repeat the above steps,till the bubble is central in both the positions.

Elimination of parallax

It consists of focusing of eyepiece and the objective.

Focussing the eyepiece This operation is done to make the cross-hairs appear clearly visible. 

The following steps are involved:-

1.     The telescope is directed towards the sky or a sheet of white paper held in front of the objective.

2.     The eyepiece is moved in or out until the cross-hairs appears clear and distinct.

Focussing the objective This operation is done to bring the image of the object in the plane of the cross-hairs. The following steps are involved:-

1. The telescope is directed towards the object.

2. The focusing screw is turned until the image appear clear and sharp.

Lesson Note On Digital Theodolite

Digital Theodolite

The term digital theodolite can be used to describe those survey instruments designed to precisely measure horizontal and vertical angles.  In addition to measuring horizontal and vertical angles, digital theodolite are used to establish straight lines, to establish horizontal and vertical distances through the use of stadia, and to establish elevations when used as a level.

A digital theodolite is a survey instrument using a three-screw leveling base, glass horizontal and vertical circles read directly with a digital display, and equipped with right-angle optical plummet for setting over specific points.

The digital theodolite consists of three main assemblies.  The upper assembly, called the alidade, includes the standards, telescope, digital display for reading the horizontal and vertical circle, plate bubbles, compass, and upper tangent (slow motion) screw.

The spindle of the alidade on the digital theodolite fits down into the hollow spindle of the next assembly, the circle assembly.  The circle assembly includes the horizontal circle that is covered by the alidade plate , the upper clamp screw, and the hollow spindle previously mentioned.

The hollow spindle of the circle assembly on the digital theodolite fits down into the leveling head, the final assembly of the digital theodolite.  The leveling head on the digital theodolite includes the four leveling screws, the half-ball joint about which opposing screws are manipulated to level the digital theodolite instrument, a threaded collar that permits attachment of the digital theodolite to a tripod, the lower clamp and slow-motion screw.

All our digital theodolite carry a minimum of a 1 year warranty and can be repaired in-house and parts are available on all models that we sell.

How to Use a Digital Theodolite Step-by-step

1.    Set up your digital theodolite over a point using the optical plummet device on the bottom of the digital theodolite.

2.    Back sight your digital theodolite survey instrument by sighting the crosshairs and focusing telescope and on a reference point.  The reference point can be occupied by a pole at least 150 feet away.

3.    The next step is to zero the digital theodolite by hitting the set zero button.

4.    You can turn any horizontal or vertical angle on the digital theodolite you want to measure or layout using the displayed readings on the LED.

5.    When you are finished put the digital theodolite back into its case and never close the case when it wet.