How to Measure Angles Using a Theodolite

A theodolite is an instrument used commonly by builders and engineers to measure precise angles, which is necessary for large scale construction projects. A basic modern optical theodolite typically consists of a small telescope which is connected to two angle measuring mechanisms, one for measuring horizontal angles and one for measuring vertical angles. It sits atop a rotatable base with a leveling mechanism on a tripod. Once the theodolite is set up, the telescope is turned to spot the desired point and then the angle from the point that the theodolite is placed to the point spotted in its telescope can be read through the eyepiece of the scope.

Taking a measurement

Step 1

Unlock the upper horizontal clamp, and rotate the theodolite until the arrow in the rough sights is lined up with the point you wish to measure, then lock the clamp. Use the upper horizontal adjuster (not the clamp) to align the object between the two vertical lights in the sight.

Step 2

Look through the small eyepiece, and using the fine adjustment knob to get a precise horizontal line up with your object. The degrees from your reference are measured on the horizontal degree scale, the minutes and seconds on the fine adjustment scale (ex. 30 degrees 10'30").

Step 3

Unlock the vertical clamp and look through the sight while moving the theodolite up and down to find the precise spot vertically on your object that you'd like to measure. Lock the clamp and use the fine vertical adjustment knob to get a precise fix on the point you've chosen. Then look through the small eyepiece and read off the degrees, minutes and seconds from the vertical scale and the fine adjustment scale as you did for the horizontal scale. If your object is up high you'll need to do a rough horizontal adjustment first, then do the vertical measurement, then readjust for the final horizontal measurement. These two coordinates give the exact angle between your reference and your point of interest, but you can also measure the angle between two points by comparing their two measurements, or by setting the first point as the reference.

Thursday, 13 September 2018